LED headlight set daytime- highbeam V2.0 H15
LED daytime running high beam set V2.0 H15
Complete conversion kit to convert the original H15 halogen lamps
The halogen bulb fitted as standard has a colour temperature of approx. 2700 Kelvin, i.e. a fairly high proportion of yellow. After this set has been installed in the vehicle, the front headlights are pure white (6000 Kelvin) and thus have a look very similar to the Xenon/LED models, for example current models of various manufacturers. In order to be able to offer an adequate LED replacement, the light distribution of the original H15 was used as an orientation when developing the body. The light location/focal point of the total of 8 LEDs per bulb corresponds exactly to that of the halogen bulb. The light locations of the two light levels are located in exactly the same place as the original H15 halogen lamp. This means that the original reflector can ideally process the generated luminous flux and achieve a convincing light cone on the road. With this article we have succeeded in realising an almost identical light distribution. Not to compare with other LEDs which were simply mounted on the H15 base or with retrofit xenon kits.
For easy mounting the bulb can be used as a replacement for the original H15 lamp. After everything is stowed away in the headlight housing, the headlight cover is closed again. This means that when the bonnet is open, nothing of the retrofit is visible.
The installation of the LED modules is uncomplicated. The installation takes place in the original socket, with the original existing mounting points and original cables. The set is if necessary again rückrüstenbar without residue. Accordingly, installation is also possible without a visit to the workshop. Of course, our LED burners have an integrated intelligent electronics, so that no annoying error message is displayed in the on-board computer. Unfortunately, we also offer LED dipped beam sets which massively interfere with the radio reception after everything is installed in the vehicle. This has been taken into account in our set in the form of integrated interference suppression electronics and will therefore not occur.
- never change bulbs again
- uniform appearance of the light, no yellow cast
- Assembly in approx. 10 minutes
- brilliant light result in perfect LED look
- ultramodern and individual optics
- optical upgrading of the vehicle
- approved for road traffic with individual approval
2 years warranty on this product.
Scope of delivery: 1 conversion set, including 2x LED bulb, mounting material