Ford Ranger license plate velcro set
Who does not know this, you go OFFROAD again, and to prevent a loss of the front license plate, you have to "just" put the license plate holder on and remove the license plate, later the same thing only the other way around... The whole thing goes faster now, we offer you a velcro set, consisting of asu fleece and hook part, fitting exactly for a standard EU license plate. With it the number plate can be removed within seconds, and even with rough dirt safely reattached, this was tested extensively. Suitable for car wash and steam jet.
Set self-adhesive Velcro tape black, fleece part and adhesive part super strong for fixing and fastening without screws, everywhere applicable - for household, office, store, workshop - ideal as tool holder or to fix license plates.
Width approx. 10,7cm, length 50cm, color black, can be cut to individual needs. The backside is coated with a high-quality adhesive. Temperature resistance: -25°C to +85°C Also suitable for attaching number plates
APPLICATION: The self-adhesive closure must be applied at a temperature of more than 10°C. Self-adhesive hook and loop fastener products can be processed without tools and without auxiliary means. The surface must be smooth, clean, free of dust and grease. Cleaning with a suitable solvent is recommended before gluing. After removing the protective film, the adhesive film must not be touched, the Velcro fastener should be applied with strong pressure. Before using the Velcro system, the adhesive needs a minimum of 1 hour Max. 24 hours rest to achieve optimum adhesion.
ATTENTION: Suitable for almost all smooth and clean surfaces. Not suitable for plastics which are difficult to bond and for products with plasticizer content. In case of constant stress or strain as well as high temperature, self-adhesive Velcro tapes can become detached or displaced.
The adhesive can be easily removed from smooth surfaces with solvent, acetone, etc. without leaving residues.